VIP-Lifting System
 
Master Link
Multi Shortening Claw
VIP Cobra Hook
More Components
Master Link selection for every crane hook (VSAK):
The chain connecting link is attached to the corresponding master link in a permanent, but flexible way.
With the foolproof fork head connection it is always assured that only the correct VIP chain can be connected. The
assortment ranges from the smallest size of VBK-link for high-resistant hoist hooks up to 110,000 lbs (50 tonnes)
crane hooks bi=10" (bi=250 mm) for 1-to-4 leg application.
Top
Multi Shortening Claw (VMVK):
The patented multi shortening claw can be fitted on the chain leg at any position. No additional chain and coupling elements are required.
A robust safety bolt with spring bearing prevents from accidential loosening of the chain in loaded as well as in unloaded condition. Ideal chain link shaped
pocket support - thus no reduction in Working Load Limit. (US Pat. 08/669 542)
Mounting:
Pull loose VIP-chain strand through the crucifix. Secure the chain in the locking pocket at the required position - drive in safety bolt and tensioning sleeve. This fixes the Multi shortening claw in the VIP-chain leg. Mounting
and securing of the third chain link (down from the suspension link) into the shortening crucifix is perferrable (4).
Handling:
Insert required chain link of the slack chain leg to be loaded into the pocket support (1), pull down chain leg (2). Unlock safety bolt; safety bolt locks automatically. Check locking. For lossening, reverse procedure. Press lateral
safety bolt (3) at the same time.
Top
VIP Cobra Hook (VCGH):
The weak points of the common fork head hooks have been eliminated. No protruding tip of the hook. Forged safety latch engages in the tip of the hook, therefore protected lateral bending
and also assures 100% sale working load limit. Coiled triple leg spring in stainless steel. Thickened tip of hook protects against misuse. Wearing edges on both sides protect against wear when hauling the chain assemblies.
Gauge marks for measuring the opening of the hook.
Top
Other Components:
There are more than 20 different components for every application. (Foundry hook VWH, high-dynamic fool-proof shackles VGSCH and combinations, swivel connectors with ball bearing VWA, fool-proof connectors and tensioners).
Top
Sales Office Locations and Email Addresses
[Wire Rope] [Wire Rope Assemblies]
[Chain] [VIP Chain] [Chain Assemblies]
[Nylon Web Slings]
Copyright © 1997 - 2007 UNALLOY-IWRC. All rights reserved.
www.unalloy-iwrc.com
|
